ハミルトニアンシミュレーション向けファンクションテンプレートの構築
このテンプレートは、ユーザー定義のスピンベースハミルトニアンに対する初期状態の時間発展をシミュレートし、AQCアドオンを使用して指定された期待値のセットを返すワークフローをカプセル化します。
このテンプレートはQiskitパターンとして構成されており、以下のステップで構成されています：
1. 入力の収集と問題のマッピング
このセクションでは、シミュレートするハミルトニアン、QuantumCircuitの形式の初期状態、期待値を推定するオブザーバブルのセット、およびAQCアドオンのオプション仕様を入力として受け取ります。このステップでは、必要なすべての入力データが存在し、正しい形式であることを検証します。
入力引数は、ワークフローに関連する量子回路と演算子を構築するために使用されます。ターゲット回路が作成され、AQCアドオンを使用してこの回路の行列積状態表現が求められます。その後、アンザッツ回路が生成され、テンソルネットワーク手法を使用して最適化され、残りの時間発展を実行する最終回路が生成されます。
2. 生成された回路を実行用に準備する
AQCアドオンから生成された回路は、選択したバックエンドで実行するためにトランスパイルされます。デフォルトのエラー軽減オプションセットを持つEstimatorV2インスタンスが作成され、回路の実行を管理します。
3. 実行
最後に、アンザッツ回路がトランスパイルされてQPU上で実行され、指定されたすべての期待値の推定値が収集され、ユーザーがアクセスできるシリアライズ可能な形式で返されます。
ファンクションテンプレートの作成
まず、AQC-Tensor Qiskitアドオンを使用して問題の記述をハードウェアで実行するための深さ削減回路にマッピングする、ハミルトニアンシミュレーション向けファンクションテンプレートを作成します。
コード全体を通じて、./source_files/template_hamiltonian_simulation.pyに保存されます。このファイルがQiskit Serverlessにアップロードしてリモートで実行できるファンクションテンプレートです。
# Added by doQumentation — required packages for this notebook
!pip install -q mergedeep numpy qiskit qiskit-addon-aqc-tensor qiskit-addon-utils qiskit-ibm-catalog qiskit-ibm-runtime qiskit-serverless quimb scipy
# This cell is hidden from users, it just creates a new folder
from pathlib import Path
Path("./source_files").mkdir(exist_ok=True)
入力の収集と検証
テンプレートの入力を取得することから始めます。この例には、ハミルトニアンシミュレ ーションに関連するドメイン固有の入力（ハミルトニアンやオブザーバブルなど）と、機能固有のオプション（AQC-Tensorを使用してトロッター回路の初期レイヤーをどの程度圧縮するか、またはこの例に含まれるデフォルトを超えたエラー抑制および軽減の微調整のための高度なオプションなど）があります。
%%writefile ./source_files/template_hamiltonian_simulation.py
from qiskit import QuantumCircuit
from qiskit_serverless import get_arguments, save_result
# Extract parameters from arguments
#
# Do this at the top of the program so it fails early if any required arguments are missing or invalid.
arguments = get_arguments()
dry_run = arguments.get("dry_run", False)
backend_name = arguments["backend_name"]
aqc_evolution_time = arguments["aqc_evolution_time"]
aqc_ansatz_num_trotter_steps = arguments["aqc_ansatz_num_trotter_steps"]
aqc_target_num_trotter_steps = arguments["aqc_target_num_trotter_steps"]
remainder_evolution_time = arguments["remainder_evolution_time"]
remainder_num_trotter_steps = arguments["remainder_num_trotter_steps"]
# Stop if this fidelity is achieved
aqc_stopping_fidelity = arguments.get("aqc_stopping_fidelity", 1.0)
# Stop after this number of iterations, even if stopping fidelity is not achieved
aqc_max_iterations = arguments.get("aqc_max_iterations", 500)
hamiltonian = arguments["hamiltonian"]
observable = arguments["observable"]
initial_state = arguments.get("initial_state", QuantumCircuit(hamiltonian.num_qubits))
Writing ./source_files/template_hamiltonian_simulation.py
%%writefile --append ./source_files/template_hamiltonian_simulation.py
import numpy as np
import json
from mergedeep import merge
# Configure `EstimatorOptions`, to control the parameters of the hardware experiment
#
# Set default options
estimator_default_options = {
"resilience": {
"measure_mitigation": True,
"zne_mitigation": True,
"zne": {
"amplifier": "gate_folding",
"noise_factors": [1, 2, 3],
"extrapolated_noise_factors": list(np.linspace(0, 3, 31)),
"extrapolator": ["exponential", "linear", "fallback"],
},
"measure_noise_learning": {
"num_randomizations": 512,
"shots_per_randomization": 512,
},
},
"twirling": {
"enable_gates": True,
"enable_measure": True,
"num_randomizations": 300,
"shots_per_randomization": 100,
"strategy": "active",
},
}
# Merge with user-provided options
estimator_options = merge(
arguments.get("estimator_options", {}), estimator_default_options
)
Appending to ./source_files/template_hamiltonian_simulation.py
ファンクションテンプレートの実行中は、print文を使用してログに情報を返すことが有用で、ワークロードの進捗をより適切に評価できます。以下は、実際に使用されたEstimatorオプションの記録が残るようにestimator_optionsを出力する簡単な例です。プログラム全体を通じて、AQC-Tensorの反復コンポーネント中の目的関数の値や、ハードウェアで実行するための最終命令セットアーキテクチャ（ISA）回路の2量子ビット深さなど、実行中の進捗を報告する同様の例が多数あります。
%%writefile --append ./source_files/template_hamiltonian_simulation.py
print("estimator_options =", json.dumps(estimator_options, indent=4))
Appending to ./source_files/template_hamiltonian_simulation.py
入力の検証
テンプレートがさまざまな入力にわたって再利用できることを確認する重要な側面は、入力の検証です。以下のコードは、AQC-Tensor中の停止忠実度が適切に指定されているかを検証し、指定されていない場合はエラーの修正方法に関する有益なエラーメッセージを返す例です。
%%writefile --append ./source_files/template_hamiltonian_simulation.py
# Perform parameter validation
if not 0.0 < aqc_stopping_fidelity <= 1.0:
raise ValueError(
f"Invalid stopping fidelity: {aqc_stopping_fidelity}. It must be a positive float no greater than 1."
)
Appending to ./source_files/template_hamiltonian_simulation.py
ファンクション出力の準備
まず、ファンクションテンプレートのすべての出力を保持する辞書を準備します。ワークフロー全体を通じてこの辞書にキーが追加され、プログラムの最後に返されます。
%%writefile --append ./source_files/template_hamiltonian_simulation.py
output = {}
Appending to ./source_files/template_hamiltonian_simulation.py
問題のマッピングとAQCによる回路の前処理
AQC-Tensor最適化はQiskitパターンのステップ1で実行されます。まず、ターゲット状態が構築されます。この例では、AQC部分と同じ時間期間、同じハミルトニアンを発展させるターゲット回路から構築されます。次に、より少ないトロッターステップを持つ同等の回路からアンザッツが生成されます。AQCアルゴリズムのメイン部分では、そのアンザッツが反復的にターゲット状態に近づけられます。最後に、結果は所望の発展時間に到達するために必要な残りのトロッターステップと組み合わせられます。
以下のコードに組み込まれたログの追加例に注意してください。
%%writefile --append ./source_files/template_hamiltonian_simulation.py
import os
os.environ["NUMBA_CACHE_DIR"] = "/data"
import datetime
import quimb.tensor
from scipy.optimize import OptimizeResult, minimize
from qiskit.synthesis import SuzukiTrotter
from qiskit_addon_utils.problem_generators import generate_time_evolution_circuit
from qiskit_addon_aqc_tensor.ansatz_generation import (
generate_ansatz_from_circuit,
AnsatzBlock,
)
from qiskit_addon_aqc_tensor.simulation import (
tensornetwork_from_circuit,
compute_overlap,
)
from qiskit_addon_aqc_tensor.simulation.quimb import QuimbSimulator
from qiskit_addon_aqc_tensor.objective import OneMinusFidelity
print("Hamiltonian:", hamiltonian)
print("Observable:", observable)
simulator_settings = QuimbSimulator(quimb.tensor.CircuitMPS, autodiff_backend="jax")
# Construct the AQC target circuit
aqc_target_circuit = initial_state.copy()
if aqc_evolution_time:
aqc_target_circuit.compose(
generate_time_evolution_circuit(
hamiltonian,
synthesis=SuzukiTrotter(reps=aqc_target_num_trotter_steps),
time=aqc_evolution_time,
),
inplace=True,
)
# Construct matrix-product state representation of the AQC target state
aqc_target_mps = tensornetwork_from_circuit(aqc_target_circuit, simulator_settings)
print("Target MPS maximum bond dimension:", aqc_target_mps.psi.max_bond())
output["target_bond_dimension"] = aqc_target_mps.psi.max_bond()
# Generate an ansatz and initial parameters from a Trotter circuit with fewer steps
aqc_good_circuit = initial_state.copy()
if aqc_evolution_time:
aqc_good_circuit.compose(
generate_time_evolution_circuit(
hamiltonian,
synthesis=SuzukiTrotter(reps=aqc_ansatz_num_trotter_steps),
time=aqc_evolution_time,
),
inplace=True,
)
aqc_ansatz, aqc_initial_parameters = generate_ansatz_from_circuit(aqc_good_circuit)
print("Number of AQC parameters:", len(aqc_initial_parameters))
output["num_aqc_parameters"] = len(aqc_initial_parameters)
# Calculate the fidelity of ansatz circuit vs. the target state, before optimization
good_mps = tensornetwork_from_circuit(aqc_good_circuit, simulator_settings)
starting_fidelity = abs(compute_overlap(good_mps, aqc_target_mps)) ** 2
print("Starting fidelity of AQC portion:", starting_fidelity)
output["aqc_starting_fidelity"] = starting_fidelity
# Optimize the ansatz parameters by using MPS calculations
def callback(intermediate_result: OptimizeResult):
fidelity = 1 - intermediate_result.fun
print(f"{datetime.datetime.now()} Intermediate result: Fidelity {fidelity:.8f}")
if intermediate_result.fun < stopping_point:
raise StopIteration
objective = OneMinusFidelity(aqc_target_mps, aqc_ansatz, simulator_settings)
stopping_point = 1.0 - aqc_stopping_fidelity
result = minimize(
objective,
aqc_initial_parameters,
method="L-BFGS-B",
jac=True,
options={"maxiter": aqc_max_iterations},
callback=callback,
)
if result.status not in (
0,
1,
99,
): # 0 => success; 1 => max iterations reached; 99 => early termination via StopIteration
raise RuntimeError(
f"Optimization failed: {result.message} (status={result.status})"
)
print(f"Done after {result.nit} iterations.")
output["num_iterations"] = result.nit
aqc_final_parameters = result.x
output["aqc_final_parameters"] = list(aqc_final_parameters)
# Construct an optimized circuit for initial portion of time evolution
aqc_final_circuit = aqc_ansatz.assign_parameters(aqc_final_parameters)
# Calculate fidelity after optimization
aqc_final_mps = tensornetwork_from_circuit(aqc_final_circuit, simulator_settings)
aqc_fidelity = abs(compute_overlap(aqc_final_mps, aqc_target_mps)) ** 2
print("Fidelity of AQC portion:", aqc_fidelity)
output["aqc_fidelity"] = aqc_fidelity
# Construct final circuit, with remainder of time evolution
final_circuit = aqc_final_circuit.copy()
if remainder_evolution_time:
remainder_circuit = generate_time_evolution_circuit(
hamiltonian,
synthesis=SuzukiTrotter(reps=remainder_num_trotter_steps),
time=remainder_evolution_time,
)
final_circuit.compose(remainder_circuit, inplace=True)
Appending to ./source_files/template_hamiltonian_simulation.py
最終回路の実行用最適化
AQCワークフローの後、final_circuitは通常通りハードウェア用にトランスパイルされます。
%%writefile --append ./source_files/template_hamiltonian_simulation.py
from qiskit_ibm_runtime import QiskitRuntimeService
from qiskit.transpiler import generate_preset_pass_manager
service = QiskitRuntimeService()
backend = service.backend(backend_name)
# Transpile PUBs (circuits and observables) to match ISA
pass_manager = generate_preset_pass_manager(backend=backend, optimization_level=3)
isa_circuit = pass_manager.run(final_circuit)
isa_observable = observable.apply_layout(isa_circuit.layout)
isa_2qubit_depth = isa_circuit.depth(lambda x: x.operation.num_qubits == 2)
print("ISA circuit two-qubit depth:", isa_2qubit_depth)
output["twoqubit_depth"] = isa_2qubit_depth
Appending to ./source_files/template_hamiltonian_simulation.py
ドライランモードの場合は早期終了
ドライランモードが選択されている場合、ハードウェアでの実行前にプログラムが停止します。これは、例えばハードウェアでの実行を決定する前にISA回路の2量子ビット深さを確認したい場合に便利です。
%%writefile --append ./source_files/template_hamiltonian_simulation.py
# Exit now if dry run; don't execute on hardware
if dry_run:
import sys
print("Exiting before hardware execution since `dry_run` is True.")
save_result(output)
sys.exit(0)
Appending to ./source_files/template_hamiltonian_simulation.py
ハードウェア上での回路の実行
%%writefile --append ./source_files/template_hamiltonian_simulation.py
# ## Step 3: Execute quantum experiments on backend
from qiskit_ibm_runtime import EstimatorV2 as Estimator
estimator = Estimator(backend, options=estimator_options)
# Submit the underlying Estimator job. Note that this is not the
# actual function job.
job = estimator.run([(isa_circuit, isa_observable)])
print("Job ID:", job.job_id())
output["job_id"] = job.job_id()
# Wait until job is complete
hw_results = job.result()
hw_results_dicts = [pub_result.data.__dict__ for pub_result in hw_results]
# Save hardware results to serverless output dictionary
output["hw_results"] = hw_results_dicts
# Reorganize expectation values
hw_expvals = [pub_result_data["evs"].tolist() for pub_result_data in hw_results_dicts]
# Save expectation values to Qiskit Serverless
print("Hardware expectation values", hw_expvals)
output["hw_expvals"] = hw_expvals[0]
Appending to ./source_files/template_hamiltonian_simulation.py
出力の保存
このファンクションテンプレートは、ハミルトニアンシミュレーションワークフローの関連するドメインレベルの出力（期待値）に加え、途中で生成された重要なメタデータを返します。
%%writefile --append ./source_files/template_hamiltonian_simulation.py
save_result(output)
Appending to ./source_files/template_hamiltonian_simulation.py
ファンクションのIBM Quantum Platformへのデプロイ
前のセクションではリモートで実行するプログラムを作成しました。このセクションのコードは、そのプログラムをQiskit Serverlessにアップロードします。
qiskit-ibm-catalogを使用して、IBM Quantum Platformダッシュボードで確認できるAPIキーでQiskitServerlessに認証し、プログラムをアップロードします。
オプションでsave_account()を使用して認証情報を保存できます（IBM Cloudアカウントの設定ガイドを参照）。これにより、QiskitRuntimeService.save_account()と同じファイルに認証情報が書き込まれることに注意してください。
from qiskit_ibm_catalog import QiskitServerless, QiskitFunction
# Authenticate to the remote cluster and submit the pattern for remote execution
serverless = QiskitServerless()
このプログラムにはカスタムpip依存関係があります。QiskitFunctionインスタンスを構築する際にdependencies配列に追加します：
template = QiskitFunction(
title="template_hamiltonian_simulation",
entrypoint="template_hamiltonian_simulation.py",
working_dir="./source_files/",
dependencies=[
"qiskit-addon-utils~=0.1.0",
"qiskit-addon-aqc-tensor[quimb-jax]~=0.1.2",
"mergedeep==1.3.4",
],
)
serverless.upload(template)
QiskitFunction(template_hamiltonian_simulation)
最後に、プログラムが正常にアップロードされたか確認するには、serverless.list()を使用します：
serverless.list()
QiskitFunction(template_hamiltonian_simulation),
ファンクションテンプレートをリモートで実行する
ファンクションテンプレートがアップロードされたので、Qiskit Serverlessを使用してリモートで実行できます。まず、名前でテンプレートを読み込みます：
template = serverless.load("template_hamiltonian_simulation")
次 に、ハミルトニアンシミュレーションのドメインレベルの入力でテンプレートを実行します。この例では、ランダム結合を持つ50量子ビットXXZモデル、初期状態、およびオブザーバブルを指定します。
from itertools import chain
import numpy as np
from qiskit.quantum_info import SparsePauliOp
L = 50
# Generate the edge list for this spin-chain
edges = [(i, i + 1) for i in range(L - 1)]
# Generate an edge-coloring so we can make hw-efficient circuits
edges = edges[::2] + edges[1::2]
# Generate random coefficients for our XXZ Hamiltonian
np.random.seed(0)
Js = np.random.rand(L - 1) + 0.5 * np.ones(L - 1)
hamiltonian = SparsePauliOp.from_sparse_list(
chain.from_iterable(
[
[
("XX", (i, j), Js[i] / 2),
("YY", (i, j), Js[i] / 2),
("ZZ", (i, j), Js[i]),
]
for i, j in edges
]
),
num_qubits=L,
)
observable = SparsePauliOp.from_sparse_list(
[("ZZ", (L // 2 - 1, L // 2), 1.0)], num_qubits=L
)
from qiskit import QuantumCircuit
initial_state = QuantumCircuit(L)
for i in range(L):
if i % 2:
initial_state.x(i)
job = template.run(
dry_run=True,
initial_state=initial_state,
hamiltonian=hamiltonian,
observable=observable,
backend_name="ibm_fez",
estimator_options={},
aqc_evolution_time=0.2,
aqc_ansatz_num_trotter_steps=1,
aqc_target_num_trotter_steps=32,
remainder_evolution_time=0.2,
remainder_num_trotter_steps=4,
aqc_max_iterations=300,
)
print(job.job_id)
853b0edb-d63f-4629-be71-398b6dcf33cb
ジョブのステータスを確認します：
job.status()
'QUEUED'
ジョブの実行中は、print()出力から作成されたログを取得できます。これらは、ハミルトニアンシミュレーションワークフローの進捗に関する有用な情報を提供できます。例えば、AQCの反復コンポーネント中の目的関数の値や、ハードウェアで実行するための最終ISA回路の2量子ビット深さなどです。
print(job.logs())
No logs yet.
結果が利用可能になるまでプログラムの残りの部分をブロックします。ジョブが完了したら、結果を取得できます。これには、ハミルトニアンシミュレーションのドメインレベルの出力（期待値）と有用なメタデータが含まれます。
result = job.result()
del result[
"aqc_final_parameters"
] # the list is too long to conveniently display here
result
{'target_bond_dimension': 5,
'num_aqc_parameters': 816,
'aqc_starting_fidelity': 0.9914382555614002,
'num_iterations': 72,
'aqc_fidelity': 0.9998108844412502,
'twoqubit_depth': 33}
ジョブ完了後、すべてのログ出力が利用可能になります。
print(job.logs())
2024-12-17 14:50:15,580 INFO job_manager.py:531 -- Runtime env is setting up.
estimator_options = {
"resilience": {
"measure_mitigation": true,
"zne_mitigation": true,
"zne": {
"amplifier": "gate_folding",
"noise_factors": [
1,
2,
3
],
"extrapolated_noise_factors": [
0.0,
0.1,
0.2,
0.30000000000000004,
0.4,
0.5,
0.6000000000000001,
0.7000000000000001,
0.8,
0.9,
1.0,
1.1,
1.2000000000000002,
1.3,
1.4000000000000001,
1.5,
1.6,
1.7000000000000002,
1.8,
1.9000000000000001,
2.0,
2.1,
2.2,
2.3000000000000003,
2.4000000000000004,
2.5,
2.6,
2.7,
2.8000000000000003,
2.9000000000000004,
3.0
],
"extrapolator": [
"exponential",
"linear",
"fallback"
]
},
"measure_noise_learning": {
"num_randomizations": 512,
"shots_per_randomization": 512
}
},
"twirling": {
"enable_gates": true,
"enable_measure": true,
"num_randomizations": 300,
"shots_per_randomization": 100,
"strategy": "active"
}
}
Hamiltonian: SparsePauliOp(['IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXX', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYY', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZ', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'XXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'YYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'ZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXI', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYI', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZI', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IIIZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IXXIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IYYIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII', 'IZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII'],
coeffs=[0.52440675+0.j, 0.52440675+0.j, 1.0488135 +0.j, 0.55138169+0.j,
0.55138169+0.j, 1.10276338+0.j, 0.4618274 +0.j, 0.4618274 +0.j,
0.9236548 +0.j, 0.46879361+0.j, 0.46879361+0.j, 0.93758721+0.j,
0.73183138+0.j, 0.73183138+0.j, 1.46366276+0.j, 0.64586252+0.j,
0.64586252+0.j, 1.29172504+0.j, 0.53402228+0.j, 0.53402228+0.j,
1.06804456+0.j, 0.28551803+0.j, 0.28551803+0.j, 0.57103606+0.j,
0.2601092 +0.j, 0.2601092 +0.j, 0.5202184 +0.j, 0.63907838+0.j,
0.63907838+0.j, 1.27815675+0.j, 0.73930917+0.j, 0.73930917+0.j,
1.47861834+0.j, 0.48073968+0.j, 0.48073968+0.j, 0.96147936+0.j,
0.30913721+0.j, 0.30913721+0.j, 0.61827443+0.j, 0.32167664+0.j,
0.32167664+0.j, 0.64335329+0.j, 0.51092416+0.j, 0.51092416+0.j,
1.02184832+0.j, 0.38227781+0.j, 0.38227781+0.j, 0.76455561+0.j,
0.47807517+0.j, 0.47807517+0.j, 0.95615033+0.j, 0.2593949 +0.j,
0.2593949 +0.j, 0.5187898 +0.j, 0.55604786+0.j, 0.55604786+0.j,
1.11209572+0.j, 0.72187404+0.j, 0.72187404+0.j, 1.44374808+0.j,
0.42975395+0.j, 0.42975395+0.j, 0.8595079 +0.j, 0.5988156 +0.j,
0.5988156 +0.j, 1.1976312 +0.j, 0.58338336+0.j, 0.58338336+0.j,
1.16676672+0.j, 0.35519128+0.j, 0.35519128+0.j, 0.71038256+0.j,
0.40771418+0.j, 0.40771418+0.j, 0.81542835+0.j, 0.60759468+0.j,
0.60759468+0.j, 1.21518937+0.j, 0.52244159+0.j, 0.52244159+0.j,
1.04488318+0.j, 0.57294706+0.j, 0.57294706+0.j, 1.14589411+0.j,
0.6958865 +0.j, 0.6958865 +0.j, 1.391773 +0.j, 0.44172076+0.j,
0.44172076+0.j, 0.88344152+0.j, 0.51444746+0.j, 0.51444746+0.j,
1.02889492+0.j, 0.71279832+0.j, 0.71279832+0.j, 1.42559664+0.j,
0.29356465+0.j, 0.29356465+0.j, 0.5871293 +0.j, 0.66630992+0.j,
0.66630992+0.j, 1.33261985+0.j, 0.68500607+0.j, 0.68500607+0.j,
1.37001215+0.j, 0.64957928+0.j, 0.64957928+0.j, 1.29915856+0.j,
0.64026459+0.j, 0.64026459+0.j, 1.28052918+0.j, 0.56996051+0.j,
0.56996051+0.j, 1.13992102+0.j, 0.72233446+0.j, 0.72233446+0.j,
1.44466892+0.j, 0.45733097+0.j, 0.45733097+0.j, 0.91466194+0.j,
0.63711684+0.j, 0.63711684+0.j, 1.27423369+0.j, 0.53421697+0.j,
0.53421697+0.j, 1.06843395+0.j, 0.55881775+0.j, 0.55881775+0.j,
1.1176355 +0.j, 0.558467 +0.j, 0.558467 +0.j, 1.116934 +0.j,
0.59091015+0.j, 0.59091015+0.j, 1.1818203 +0.j, 0.46851598+0.j,
0.46851598+0.j, 0.93703195+0.j, 0.28011274+0.j, 0.28011274+0.j,
0.56022547+0.j, 0.58531893+0.j, 0.58531893+0.j, 1.17063787+0.j,
0.31446315+0.j, 0.31446315+0.j, 0.6289263 +0.j])
Observable: SparsePauliOp(['IIIIIIIIIIIIIIIIIIIIIIIIZZIIIIIIIIIIIIIIIIIIIIIIII'],
coeffs=[1.+0.j])
Target MPS maximum bond dimension: 5
Number of AQC parameters: 816
Starting fidelity of AQC portion: 0.9914382555614002
2024-12-17 14:52:23.400028 Intermediate result: Fidelity 0.99764093
2024-12-17 14:52:23.429669 Intermediate result: Fidelity 0.99788003
2024-12-17 14:52:23.459674 Intermediate result: Fidelity 0.99795970
2024-12-17 14:52:23.489666 Intermediate result: Fidelity 0.99799067
2024-12-17 14:52:23.518545 Intermediate result: Fidelity 0.99803401
2024-12-17 14:52:23.546952 Intermediate result: Fidelity 0.99809821
2024-12-17 14:52:23.575271 Intermediate result: Fidelity 0.99824660
2024-12-17 14:52:23.604049 Intermediate result: Fidelity 0.99845326
2024-12-17 14:52:23.632709 Intermediate result: Fidelity 0.99870497
2024-12-17 14:52:23.660527 Intermediate result: Fidelity 0.99891442
2024-12-17 14:52:23.688273 Intermediate result: Fidelity 0.99904488
2024-12-17 14:52:23.716105 Intermediate result: Fidelity 0.99914438
2024-12-17 14:52:23.744336 Intermediate result: Fidelity 0.99922827
2024-12-17 14:52:23.773399 Intermediate result: Fidelity 0.99929071
2024-12-17 14:52:23.801482 Intermediate result: Fidelity 0.99932432
2024-12-17 14:52:23.830466 Intermediate result: Fidelity 0.99936460
2024-12-17 14:52:23.860738 Intermediate result: Fidelity 0.99938891
2024-12-17 14:52:23.889958 Intermediate result: Fidelity 0.99940607
2024-12-17 14:52:23.918703 Intermediate result: Fidelity 0.99941965
2024-12-17 14:52:23.949744 Intermediate result: Fidelity 0.99944337
2024-12-17 14:52:23.980871 Intermediate result: Fidelity 0.99946875
2024-12-17 14:52:24.012124 Intermediate result: Fidelity 0.99949009
2024-12-17 14:52:24.044359 Intermediate result: Fidelity 0.99952191
2024-12-17 14:52:24.075840 Intermediate result: Fidelity 0.99953669
2024-12-17 14:52:24.106303 Intermediate result: Fidelity 0.99955242
2024-12-17 14:52:24.139329 Intermediate result: Fidelity 0.99958412
2024-12-17 14:52:24.169725 Intermediate result: Fidelity 0.99960176
2024-12-17 14:52:24.198749 Intermediate result: Fidelity 0.99961606
2024-12-17 14:52:24.227874 Intermediate result: Fidelity 0.99963811
2024-12-17 14:52:24.256818 Intermediate result: Fidelity 0.99964383
2024-12-17 14:52:24.285889 Intermediate result: Fidelity 0.99964717
2024-12-17 14:52:24.315228 Intermediate result: Fidelity 0.99966064
2024-12-17 14:52:24.345322 Intermediate result: Fidelity 0.99966517
2024-12-17 14:52:24.374921 Intermediate result: Fidelity 0.99967089
2024-12-17 14:52:24.404309 Intermediate result: Fidelity 0.99968305
2024-12-17 14:52:24.432664 Intermediate result: Fidelity 0.99968889
2024-12-17 14:52:24.461639 Intermediate result: Fidelity 0.99969997
2024-12-17 14:52:24.491244 Intermediate result: Fidelity 0.99971666
2024-12-17 14:52:24.520354 Intermediate result: Fidelity 0.99972441
2024-12-17 14:52:24.549965 Intermediate result: Fidelity 0.99973561
2024-12-17 14:52:24.583464 Intermediate result: Fidelity 0.99973811
2024-12-17 14:52:24.617537 Intermediate result: Fidelity 0.99974074
2024-12-17 14:52:24.652247 Intermediate result: Fidelity 0.99974467
2024-12-17 14:52:24.686831 Intermediate result: Fidelity 0.99974991
2024-12-17 14:52:24.725476 Intermediate result: Fidelity 0.99975230
2024-12-17 14:52:24.764637 Intermediate result: Fidelity 0.99975373
2024-12-17 14:52:24.802499 Intermediate result: Fidelity 0.99975552
2024-12-17 14:52:24.839960 Intermediate result: Fidelity 0.99975885
2024-12-17 14:52:24.877472 Intermediate result: Fidelity 0.99976469
2024-12-17 14:52:24.916233 Intermediate result: Fidelity 0.99976517
2024-12-17 14:52:24.993750 Intermediate result: Fidelity 0.99976875
2024-12-17 14:52:25.034953 Intermediate result: Fidelity 0.99976887
2024-12-17 14:52:25.076197 Intermediate result: Fidelity 0.99977244
2024-12-17 14:52:25.112340 Intermediate result: Fidelity 0.99977638
2024-12-17 14:52:25.149947 Intermediate result: Fidelity 0.99977828
2024-12-17 14:52:25.190049 Intermediate result: Fidelity 0.99978174
2024-12-17 14:52:25.310903 Intermediate result: Fidelity 0.99978222
2024-12-17 14:52:25.347512 Intermediate result: Fidelity 0.99978508
2024-12-17 14:52:25.385201 Intermediate result: Fidelity 0.99978543
2024-12-17 14:52:25.457436 Intermediate result: Fidelity 0.99978770
2024-12-17 14:52:25.497133 Intermediate result: Fidelity 0.99978818
2024-12-17 14:52:25.541179 Intermediate result: Fidelity 0.99978913
2024-12-17 14:52:25.584791 Intermediate result: Fidelity 0.99978937
2024-12-17 14:52:25.621484 Intermediate result: Fidelity 0.99979068
2024-12-17 14:52:25.655847 Intermediate result: Fidelity 0.99979211
2024-12-17 14:52:25.691710 Intermediate result: Fidelity 0.99979700
2024-12-17 14:52:25.767711 Intermediate result: Fidelity 0.99979759
2024-12-17 14:52:25.804517 Intermediate result: Fidelity 0.99979807
2024-12-17 14:52:25.839394 Intermediate result: Fidelity 0.99980236
2024-12-17 14:52:25.874438 Intermediate result: Fidelity 0.99980296
2024-12-17 14:52:25.909900 Intermediate result: Fidelity 0.99980320
2024-12-17 14:52:26.713044 Intermediate result: Fidelity 0.99980320
Done after 72 iterations.
Fidelity of AQC portion: 0.9998108844412502
ISA circuit two-qubit depth: 33
Exiting before hardware execution since `dry_run` is True.
次のステップ
推奨事項
AQC-Tensor Qiskitアドオンの詳細については、近似量子コンパイルによる改善されたトロッター化時間発展チュートリアルまたはqiskit-addon-aqc-tensorリポジトリをご覧ください。
%%writefile ./source_files/template_hamiltonian_simulation_full.py
from qiskit import QuantumCircuit
from qiskit_serverless import get_arguments, save_result
# Extract parameters from arguments
#
# Do this at the top of the program so it fails early if any required arguments are missing or invalid.
arguments = get_arguments()
dry_run = arguments.get("dry_run", False)
backend_name = arguments["backend_name"]
aqc_evolution_time = arguments["aqc_evolution_time"]
aqc_ansatz_num_trotter_steps = arguments["aqc_ansatz_num_trotter_steps"]
aqc_target_num_trotter_steps = arguments["aqc_target_num_trotter_steps"]
remainder_evolution_time = arguments["remainder_evolution_time"]
remainder_num_trotter_steps = arguments["remainder_num_trotter_steps"]
# Stop if this fidelity is achieved
aqc_stopping_fidelity = arguments.get("aqc_stopping_fidelity", 1.0)
# Stop after this number of iterations, even if stopping fidelity is not achieved
aqc_max_iterations = arguments.get("aqc_max_iterations", 500)
hamiltonian = arguments["hamiltonian"]
observable = arguments["observable"]
initial_state = arguments.get("initial_state", QuantumCircuit(hamiltonian.num_qubits))
import numpy as np
import json
from mergedeep import merge
# Configure `EstimatorOptions`, to control the parameters of the hardware experiment
#
# Set default options
estimator_default_options = {
"resilience": {
"measure_mitigation": True,
"zne_mitigation": True,
"zne": {
"amplifier": "gate_folding",
"noise_factors": [1, 2, 3],
"extrapolated_noise_factors": list(np.linspace(0, 3, 31)),
"extrapolator": ["exponential", "linear", "fallback"],
},
"measure_noise_learning": {
"num_randomizations": 512,
"shots_per_randomization": 512,
},
},
"twirling": {
"enable_gates": True,
"enable_measure": True,
"num_randomizations": 300,
"shots_per_randomization": 100,
"strategy": "active",
},
}
# Merge with user-provided options
estimator_options = merge(
arguments.get("estimator_options", {}), estimator_default_options
)
print("estimator_options =", json.dumps(estimator_options, indent=4))
# Perform parameter validation
if not 0.0 < aqc_stopping_fidelity <= 1.0:
raise ValueError(
f"Invalid stopping fidelity: {aqc_stopping_fidelity}. It must be a positive float no greater than 1."
)
output = {}
import os
os.environ["NUMBA_CACHE_DIR"] = "/data"
import datetime
import quimb.tensor
from scipy.optimize import OptimizeResult, minimize
from qiskit.synthesis import SuzukiTrotter
from qiskit_addon_utils.problem_generators import generate_time_evolution_circuit
from qiskit_addon_aqc_tensor.ansatz_generation import (
generate_ansatz_from_circuit,
AnsatzBlock,
)
from qiskit_addon_aqc_tensor.simulation import (
tensornetwork_from_circuit,
compute_overlap,
)
from qiskit_addon_aqc_tensor.simulation.quimb import QuimbSimulator
from qiskit_addon_aqc_tensor.objective import OneMinusFidelity
print("Hamiltonian:", hamiltonian)
print("Observable:", observable)
simulator_settings = QuimbSimulator(quimb.tensor.CircuitMPS, autodiff_backend="jax")
# Construct the AQC target circuit
aqc_target_circuit = initial_state.copy()
if aqc_evolution_time:
aqc_target_circuit.compose(
generate_time_evolution_circuit(
hamiltonian,
synthesis=SuzukiTrotter(reps=aqc_target_num_trotter_steps),
time=aqc_evolution_time,
),
inplace=True,
)
# Construct matrix-product state representation of the AQC target state
aqc_target_mps = tensornetwork_from_circuit(aqc_target_circuit, simulator_settings)
print("Target MPS maximum bond dimension:", aqc_target_mps.psi.max_bond())
output["target_bond_dimension"] = aqc_target_mps.psi.max_bond()
# Generate an ansatz and initial parameters from a Trotter circuit with fewer steps
aqc_good_circuit = initial_state.copy()
if aqc_evolution_time:
aqc_good_circuit.compose(
generate_time_evolution_circuit(
hamiltonian,
synthesis=SuzukiTrotter(reps=aqc_ansatz_num_trotter_steps),
time=aqc_evolution_time,
),
inplace=True,
)
aqc_ansatz, aqc_initial_parameters = generate_ansatz_from_circuit(aqc_good_circuit)
print("Number of AQC parameters:", len(aqc_initial_parameters))
output["num_aqc_parameters"] = len(aqc_initial_parameters)
# Calculate the fidelity of ansatz circuit vs. the target state, before optimization
good_mps = tensornetwork_from_circuit(aqc_good_circuit, simulator_settings)
starting_fidelity = abs(compute_overlap(good_mps, aqc_target_mps)) ** 2
print("Starting fidelity of AQC portion:", starting_fidelity)
output["aqc_starting_fidelity"] = starting_fidelity
# Optimize the ansatz parameters by using MPS calculations
def callback(intermediate_result: OptimizeResult):
fidelity = 1 - intermediate_result.fun
print(f"{datetime.datetime.now()} Intermediate result: Fidelity {fidelity:.8f}")
if intermediate_result.fun < stopping_point:
raise StopIteration
objective = OneMinusFidelity(aqc_target_mps, aqc_ansatz, simulator_settings)
stopping_point = 1.0 - aqc_stopping_fidelity
result = minimize(
objective,
aqc_initial_parameters,
method="L-BFGS-B",
jac=True,
options={"maxiter": aqc_max_iterations},
callback=callback,
)
if result.status not in (
0,
1,
99,
): # 0 => success; 1 => max iterations reached; 99 => early termination via StopIteration
raise RuntimeError(
f"Optimization failed: {result.message} (status={result.status})"
)
print(f"Done after {result.nit} iterations.")
output["num_iterations"] = result.nit
aqc_final_parameters = result.x
output["aqc_final_parameters"] = list(aqc_final_parameters)
# Construct an optimized circuit for initial portion of time evolution
aqc_final_circuit = aqc_ansatz.assign_parameters(aqc_final_parameters)
# Calculate fidelity after optimization
aqc_final_mps = tensornetwork_from_circuit(aqc_final_circuit, simulator_settings)
aqc_fidelity = abs(compute_overlap(aqc_final_mps, aqc_target_mps)) ** 2
print("Fidelity of AQC portion:", aqc_fidelity)
output["aqc_fidelity"] = aqc_fidelity
# Construct final circuit, with remainder of time evolution
final_circuit = aqc_final_circuit.copy()
if remainder_evolution_time:
remainder_circuit = generate_time_evolution_circuit(
hamiltonian,
synthesis=SuzukiTrotter(reps=remainder_num_trotter_steps),
time=remainder_evolution_time,
)
final_circuit.compose(remainder_circuit, inplace=True)
from qiskit_ibm_runtime import QiskitRuntimeService
from qiskit.transpiler import generate_preset_pass_manager
service = QiskitRuntimeService()
backend = service.backend(backend_name)
# Transpile PUBs (circuits and observables) to match ISA
pass_manager = generate_preset_pass_manager(backend=backend, optimization_level=3)
isa_circuit = pass_manager.run(final_circuit)
isa_observable = observable.apply_layout(isa_circuit.layout)
isa_2qubit_depth = isa_circuit.depth(lambda x: x.operation.num_qubits == 2)
print("ISA circuit two-qubit depth:", isa_2qubit_depth)
output["twoqubit_depth"] = isa_2qubit_depth
# Exit now if dry run; don't execute on hardware
if dry_run:
import sys
print("Exiting before hardware execution since `dry_run` is True.")
save_result(output)
sys.exit(0)
# ## Step 3: Execute quantum experiments on backend
from qiskit_ibm_runtime import EstimatorV2 as Estimator
estimator = Estimator(backend, options=estimator_options)
# Submit the underlying Estimator job. Note that this is not the
# actual function job.
job = estimator.run([(isa_circuit, isa_observable)])
print("Job ID:", job.job_id())
output["job_id"] = job.job_id()
# Wait until job is complete
hw_results = job.result()
hw_results_dicts = [pub_result.data.__dict__ for pub_result in hw_results]
# Save hardware results to serverless output dictionary
output["hw_results"] = hw_results_dicts
# Reorganize expectation values
hw_expvals = [pub_result_data["evs"].tolist() for pub_result_data in hw_results_dicts]
# Save expectation values to Qiskit Serverless
output["hw_expvals"] = hw_expvals[0]
save_result(output)
Overwriting ./source_files/template_hamiltonian_simulation_full.py
完全なプログラムソースコード
以下は./source_files/template_hamiltonian_simulation.py全体を1つのコードブロックとしてまとめたものです。
# This cell is hidden from users. It verifies both source listings are identical then deletes the working folder we created
import shutil
with open("./source_files/template_hamiltonian_simulation.py") as f1:
with open("./source_files/template_hamiltonian_simulation_full.py") as f2:
assert f1.read() == f2.read()
shutil.rmtree("./source_files/")